Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
I installed a bow roller very similar to the one in the thread Steve linked to. Only I own a C-25. Pretty straight forward (no pun intended) just be sure to review drilling and sealing holes in your deck. I went "over board" drilling slightly larger holes, taping from below, filling the holes with epoxy then drilling the correct sized holes. I also put it on the starboard side as my anchor locker opens that way. The C-25 has a flat spot next to the forestay and the roller had to be slightly angled to fit. I did it quite a few years ago and it works well and has never leaked. Windline AR-7 Fairlead Anchor Roller https://www.wmjmarine.com/42-3104.html
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.