Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 Catalina 250 Specific Forum
 Masthead Pin Size
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

frog0911
Master Marine Consultant

Member Avatar

USA
1349 Posts

Initially Posted - 04/20/2004 :  09:47:41  Show Profile
Need a little help from a trailer sailer that has their mast down. I was up the mast the other day an notice the spin halyard block was just put through a pin hole instead of hook to a masthead pin. What I need is to know the size (dia. and length) of the masthead forestay pin so I can get one and install the next time I am up top. Thanks in advance.

Frog and The General

C250, Pretty Penny II, #743
FLEET 25
Coronado 15, M-Cube, #3316

Edited by - on

Keith D.
Navigator

Members Avatar

USA
233 Posts

Response Posted - 04/20/2004 :  11:40:48  Show Profile
I was just out working on the boat and pulled one of the pins it measured 5/16 x 2" .

Keith

Edited by - Keith D. on 04/20/2004 11:47:01
Go to Top of Page

frog0911
Master Marine Consultant

Members Avatar

USA
1349 Posts

Response Posted - 04/20/2004 :  21:30:58  Show Profile
I new one of you trailer guys would come up with the answer. Thanks Keith very much. Now all I have to do is find a two inch long clevis pin.

Edited by - on
Go to Top of Page

Keith D.
Navigator

Members Avatar

USA
233 Posts

Response Posted - 04/21/2004 :  10:54:10  Show Profile
West Marine catalog page 1009 item 242842

Edited by - on
Go to Top of Page

frog0911
Master Marine Consultant

Members Avatar

USA
1349 Posts

Response Posted - 04/21/2004 :  21:16:25  Show Profile
Thanks I saw that, but my WM doesn't carry them. As a matter of fact they don't carry a lot of sailing parts. I could special order it for an additional $5.00. So a $4.00 part would cost $9.00 plus tax. We have a couple of other stores other than WM so will try them first. Thanks again Keith.

Edited by - on
Go to Top of Page

Keith D.
Navigator

Members Avatar

USA
233 Posts

Response Posted - 04/21/2004 :  23:26:55  Show Profile
I have the same problem with the WM by me. They say they are for powerboats not sail boats. When I special order something there is no extra charge and they usally have it in from their warehouse the next day, maybe two, I just stop by and pick it up at the store and then they don't charge you for shipping.

Edited by - Keith D. on 04/22/2004 10:07:09
Go to Top of Page

Buzz Maring
Master Marine Consultant

Members Avatar

USA
1768 Posts

Response Posted - 04/22/2004 :  11:02:12  Show Profile
<font color="blue">... my WM doesn't carry them. As a matter of fact they don't carry a lot of sailing parts. I could special order it for an additional $5.00. - Jerry</font id="blue">

<font color="blue"> I have the same problem with the WM by me. They say they are for powerboats not sail boats. When I special order something there is no extra charge and they usally have it in from their warehouse the next day, maybe two, I just stop by and pick it up at the store and then they don't charge you for shipping. - Keith</font id="blue">

The West Marine in San Antonio can barely spell "sailboat." However, they've always tried to be helpful ... they don't charge extra for "special orders" ... in fact, they ship out-of-stock stuff directly to my house at no extra charge ... I like that

Maybe you can relate this to your stores and get them to match what other WM stores are doing ... it's worth a try.

Edited by - on
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.