Association Forum - Parting out a 1977 C-25 located in Columbus, OH

Assn Members Area · Join

Home.

Association Forum

Ships Store

Cruising

Racing

Technical Tips

Photo Gallery - New

Boat Search - Updated

Manuals & Brochures

Swap Meet

Links

Officer Flag Line & Staff

Bylaws & Constitution

Members Area

Join the Association

Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.

Association Forum

Username:	Password:
Save Password
Forgot your Password?

All Forums

Catalina/Capri 25/250 Sailor's Forums

Swap Meet

Parting out a 1977 C-25 located in Columbus, OH

New Topic

Topic Locked

Printer Friendly

Previous Page | Next Page

Author

Topic

Page: of 14

GaryB
Master Marine Consultant

Members Avatar

USA
4303 Posts

Response Posted - 09/20/2010 : 14:49:21

Edited by - on

calden
Navigator

Members Avatar

USA
194 Posts

Response Posted - 09/20/2010 : 15:36:44

Chris:

THat sounds great for the traveler car. Are all the sheaves intact? There should be five of them, two pairs and a single under the shackle.

Thanks much,
Carlos

Email me please for Pay Pay instructions:
calden3 "at" msn "dot" com

Edited by - on

dubbinchris
Navigator

Members Avatar

209 Posts

Response Posted - 09/20/2010 : 16:25:24

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by calden
 Chris:

THat sounds great for the traveler car. Are all the sheaves intact? There should be five of them, two pairs and a single under the shackle.

Thanks much,
Carlos

Email me please for Pay Pay instructions:
calden3 "at" msn "dot" com
<hr height="1" noshade id="quote"></blockquote id="quote">

It appears to be. I will double check though.

Edited by - on

dubbinchris
Navigator

Members Avatar

209 Posts

Response Posted - 09/20/2010 : 16:26:51

Port...

Bow eye...

Edited by - dubbinchris on 09/20/2010 16:38:46

calden
Navigator

Members Avatar

USA
194 Posts

Response Posted - 09/20/2010 : 16:53:50

Chris, that traveler car looks great. I'll buy it for sure.

Carlos

Edited by - on

dubbinchris
Navigator

Members Avatar

209 Posts

Response Posted - 09/20/2010 : 17:39:45

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by calden
 Chris, that traveler car looks great. I'll buy it for sure.

Carlos
<hr height="1" noshade id="quote"></blockquote id="quote">

Ok good to hear. I'll email you paypal info.

Edited by - on

GaryB
Master Marine Consultant

Members Avatar

USA
4303 Posts

Response Posted - 09/20/2010 : 17:53:16

Port...

Bow eye...

<hr height="1" noshade id="quote"></blockquote id="quote">
Chris,

I'm going to pass on the mainsail cover and bow eye. I think the mainsail cover may be too short for my setup and I've decided to go with the bow eye kit with backing block from Catalina Direct.

How much for all the cleats? I'd like the backing blocks if they are not attached to firmly.

Edited by - GaryB on 09/20/2010 17:54:44

mytime25
1st Mate

Members Avatar

USA
50 Posts

Response Posted - 09/20/2010 : 18:43:03

"[Mine looks well worn, so how about $100 and we'll consider that negotiable at this point.]"

I would like to talk to you more about anhor locker hatch. could you send me some close up shots? Are there any cracks or weak spots on it? E-mail d dot oltmannns nine one five at yahoo dot com
Thank you

Edited by - on

dubbinchris
Navigator

Members Avatar

209 Posts

Response Posted - 09/20/2010 : 19:06:59

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by mytime25
 "[Mine looks well worn, so how about $100 and we'll consider that negotiable at this point.]"

I would like to talk to you more about anhor locker hatch. could you send me some close up shots? Are there any cracks or weak spots on it? E-mail d dot oltmannns nine one five at yahoo dot com
Thank you
<hr height="1" noshade id="quote"></blockquote id="quote">

Looks like BenD has first shot at the anchor locker hatch at this point, but I can still email you the high res versions of the photos I posted. There appears to be one crack on the underside but the hatch doesn't appear weak at all.

I won't be able to email the photos until tomorrow as they are on my home computer and I'm at work until 8am.

Edited by - on

dubbinchris
Navigator

Members Avatar

209 Posts

Response Posted - 09/20/2010 : 19:26:28

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by GaryB
 <blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by dubbinchris
 <blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by GaryB
 <blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by dubbinchris
 <blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by GaryB
 Chris,

I'm interested in the bow eye, the mainsail cover, and all the cleats in the two pictures above.
<hr height="1" noshade id="quote"></blockquote id="quote">

In regards to the cleats, do you mean just the two regular cleats or those and the locking ones as well?
<hr height="1" noshade id="quote"></blockquote id="quote">
The regular and locking cleats from both sides if available.

I can't see the pictures at work so I will get back with you on the other items this evening.
<hr height="1" noshade id="quote"></blockquote id="quote">

No problem, I have taken additional photos to show both the regular cleats and the locking ones.

<hr height="1" noshade id="quote"></blockquote id="quote">
Chris,

I'm going to pass on the mainsail cover and bow eye. I think the mainsail cover may be too short for my setup and I've decided to go with the bow eye kit with backing block from Catalina Direct.

How much for all the cleats? I'd like the backing blocks if they are not attached to firmly.
<hr height="1" noshade id="quote"></blockquote id="quote">

Even with the 2' extension? No problem man. I was going to mention the Bow eye from Catalina Direct as it didn't look very expensive.

Anyway, the cleats are small items so lets say $25 for all 4 pieces plus shipping and the paypal 3%

Edit, it appears as though paypal is now 4.5%...

Edited by - dubbinchris on 09/20/2010 19:58:19

dubbinchris
Navigator

Members Avatar

209 Posts

Response Posted - 09/20/2010 : 19:28:07

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by calden
 Chris, that traveler car looks great. I'll buy it for sure.

Carlos
<hr height="1" noshade id="quote"></blockquote id="quote">

Got your $$, I'll try to ship either tomorrow or the next day. Back to back 12 hour night shifts are tough on the body. I'll then let you know shipping costs.

Edited by - on

Mark Maxwell
Captain

Members Avatar

USA
329 Posts

Response Posted - 09/20/2010 : 23:41:18

Hi Chris, tried to e-mail again. It's probably my fault....old laptop. Anyway thanks for taking all the pictures of the boards,( BTW my wife likes your dog :-) You didn't note a price? (for the boards not the dog) Haha

Edited by - on

dubbinchris
Navigator

Members Avatar

209 Posts

Response Posted - 09/20/2010 : 23:50:04

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Mark Maxwell
 Hi Chris, tried to e-mail again. It's probably my fault....old laptop. Anyway thanks for taking all the pictures of the boards,( BTW my wife likes your dog :-) You didn't note a price? (for the boards not the dog) Haha
<hr height="1" noshade id="quote"></blockquote id="quote">

Glad she likes the dog. Here she is again with a passenger, my girlfriends dog.

Anyway I've never tried to refinish teak. I've seen lots of boats running around with teak looking worse than this stuff and it doesn's seem to bother them so I'm guessing it's pretty doable, I just don't know how. I looked up the price of getting those three boards new and it was well over $300. Since these are going to need some TLC lets say $100 plus shipping to you? Let me know what you think.

Chris

Edited by - on

BenD
1st Mate

Members Avatar

USA
36 Posts

Response Posted - 09/21/2010 : 04:27:37

Chris,

Sent you a message about the anchor hatch. Since Gary is passing on the mainsail cover, does that put me second? You said the mainsail cover was 9.5' overall...does that include all extensions as far out as it can go?

Edited by - on

dubbinchris
Navigator

Members Avatar

209 Posts

Response Posted - 09/21/2010 : 05:28:37

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by BenD
 Chris,

Sent you a message about the anchor hatch. Since Gary is passing on the mainsail cover, does that put me second? You said the mainsail cover was 9.5' overall...does that include all extensions as far out as it can go?
<hr height="1" noshade id="quote"></blockquote id="quote">

Replied to your email, also the 9.5' is the measurement of the mainsail cover not including the 2' extension.

Edited by - on

dmpilc
Master Marine Consultant

Members Avatar

USA
4593 Posts

Response Posted - 09/21/2010 : 09:15:43

I can go to $80 for the 2 jib cars and carbo blocks (stainless slides are $60 new on West Marine's web site) and $15 for the spring block at the bow for a total of $95. If you accept, let me know how to send payment.

Edited by - on

dbwarman
Deckhand

Members Avatar

10 Posts

Response Posted - 09/21/2010 : 10:40:41

I am interested in the tiller to rudder mounting bracket and the rear life lines. How much plus shipping to Independence, Missouri. I can be reached at dbwarman@gmail.com

Edited by - on

GaryB
Master Marine Consultant

Members Avatar

USA
4303 Posts

Response Posted - 09/21/2010 : 11:25:18

Edited by - on

djdurrett
Navigator

Members Avatar

124 Posts

Response Posted - 09/21/2010 : 13:25:34

PCP7777 (Peter) you should jump on those spreader sockets... they are updated. However you are on your own in dropping the rig!

Edited by - on

dubbinchris
Navigator

Members Avatar

209 Posts

Response Posted - 09/21/2010 : 13:35:04

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by GaryB
 <blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by dubbinchris
 <blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by BenD
 Chris,

Sent you a message about the anchor hatch. Since Gary is passing on the mainsail cover, does that put me second? You said the mainsail cover was 9.5' overall...does that include all extensions as far out as it can go?
<hr height="1" noshade id="quote"></blockquote id="quote">

Replied to your email, also the 9.5' is the measurement of the mainsail cover not including the 2' extension.
<hr height="1" noshade id="quote"></blockquote id="quote">
Oh, I thought the 9' 5" was including the extension! If that does not include the extension I'd like to take it if it's still available. I'll also accept $25.00 for the four cleats we discussed above.

Let me know.
<hr height="1" noshade id="quote"></blockquote id="quote">

Come on Gary you're putting me in a bind here, haha. I've already emailed Ben stating that the main sail cover is his since you passed on it. I want to be as fair as possible so I went back to read again what I posted to see if I said something ambigious or unclear. I stated that the cover was 9.5' long and it ALSO had a 2' extension on it. I'll have to say at this point it's his unless he bows out in light of your mind change. I will let you two work it out, be it here or privately. In the meantime I'll work on getting those cleats off and backing plates if possible.

Edit: So just pulled all four cleats that you wanted, and there were no backing plates. Had to clear out a very busy bees nest first. I will wait on shipping until we work out the sail cover thing.

Edited by - dubbinchris on 09/21/2010 14:54:55

dubbinchris
Navigator

Members Avatar

209 Posts

Response Posted - 09/21/2010 : 14:59:07

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by dbwarman
 I am interested in the tiller to rudder mounting bracket and the rear life lines. How much plus shipping to Independence, Missouri. I can be reached at dbwarman@gmail.com
<hr height="1" noshade id="quote"></blockquote id="quote">

Tiller to rudder mounting bracket, I'll take $20 plus shipping for it.

In regards the rear life line, my boat only has one life line that runs up each side not necc a front or rear. Unless you're speaking of the whole rear rail/pulpit then that might be tough to get to you shipping wise.

Edited by - on

dubbinchris
Navigator

Members Avatar

209 Posts

Response Posted - 09/21/2010 : 15:03:04

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by dmpilc
 I can go to $80 for the 2 jib cars and carbo blocks (stainless slides are $60 new on West Marine's web site) and $15 for the spring block at the bow for a total of $95. If you accept, let me know how to send payment.
<hr height="1" noshade id="quote"></blockquote id="quote">

I'm fine with that offer. Paypal is kleinbiker1 "at" aol ""dot"" com. Please add in 4.5% for their fee if you don't mind. As per my very first post, I'll box it up for shipping and then let you know actual shipping cost for a second paypal payment. Please put in the note section when paying me which items it's for. Sometimes screen names, real names, email addresses, and paypal addresses don't always line up.

Thanks,
Chris

Edited by - on

GaryB
Master Marine Consultant

Members Avatar

USA
4303 Posts

Response Posted - 09/21/2010 : 15:20:11

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by dubbinchris
 <blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by GaryB
 <blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by dubbinchris
 <blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by BenD
 Chris,

Sent you a message about the anchor hatch. Since Gary is passing on the mainsail cover, does that put me second? You said the mainsail cover was 9.5' overall...does that include all extensions as far out as it can go?
<hr height="1" noshade id="quote"></blockquote id="quote">

Replied to your email, also the 9.5' is the measurement of the mainsail cover not including the 2' extension.
<hr height="1" noshade id="quote"></blockquote id="quote">
Oh, I thought the 9' 5" was including the extension! If that does not include the extension I'd like to take it if it's still available. I'll also accept $25.00 for the four cleats we discussed above.

Let me know.
<hr height="1" noshade id="quote"></blockquote id="quote">

Come on Gary you're putting me in a bind here, haha. I've already emailed Ben stating that the main sail cover is his since you passed on it. I want to be as fair as possible so I went back to read again what I posted to see if I said something ambigious or unclear. I stated that the cover was 9.5' long and it ALSO had a 2' extension on it. I'll have to say at this point it's his unless he bows out in light of your mind change. I will let you two work it out, be it here or privately. In the meantime I'll work on getting those cleats off and backing plates if possible.

Edit: So just pulled all four cleats that you wanted, and there were no backing plates. Had to clear out a very busy bees nest first. I will wait on shipping until we work out the sail cover thing.
<hr height="1" noshade id="quote"></blockquote id="quote">
I missed the ALSO part on first read so it's my bad. No problem letting Ben have the cover.

I'll get back with you this evening when I get home to finalize the cleat deal. I've got to dig up my PayPal info.

Edited by - on

GaryB
Master Marine Consultant

Members Avatar

USA
4303 Posts

Response Posted - 09/21/2010 : 15:21:11

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by djdurrett
 PCP7777 (Peter) you should jump on those spreader sockets... they are updated. However you are on your own in dropping the rig!

<hr height="1" noshade id="quote"></blockquote id="quote">
I may be in Denton in a couple of weeks. I could bring my A-Frame if I come.

Edited by - on

Slingerland
1st Mate

Members Avatar

USA
96 Posts

Response Posted - 09/21/2010 : 15:35:36

Respectfully to everybody... we have a lot of different items for sale in the one thread. Perhaps Chris should start creating new threads for the various pieces? I see where garyB and Chris lost touch on the main sail cover [:;].

Edited by - on

Page: of 14

Topic

Previous Page | Next Page

New Topic

Topic Locked

Printer Friendly

Jump To:

Association Forum

Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.