Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
1) Different hardware on the sink locker door and wet locker door in the head. 2) Added a light above the galley. 3) Different latches on port in the head. 4) Different lights above the table. 5) Located the hose in the bilge for the pump in a better place.
Looking at the early pictures on this post, Did they do did something with the rudder gungeons? I don't recall mine on a raised mounting bed/fiberglass. I'll have to look again when I get to the boat. I sure wish I had the spinaker set up!!
Anyway just cruising the net with the snow falling in Olympia tonight. Glad I put the cover on my boat after the last great sail on Thanksgiving weekend.
Great find Wil. I thought I recognized a slight difference in the V-berth, like you, will have to look inside JD to see. (of course we have the swing keel not the wing.)
I like that stud hanging pack in the head. We put in self adheasive 2" velcro to hold things for extra storage in the head, I can see a mod coming on!
Also noted that the V-berth storage compartment cover is now split bow-to-stern! Also, all the storage compartment covers are some white material. I like the little spot light in the galey.
My 2000 bilge hose placement is like the one in the movie.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.