Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
My cabin table mod is posted on the 250 Tech Tip site. It's a mod exclusively for a 250; a narrower but a bit longer table to replace the oversized factory equipped one, and with fiddles. The white plastic thingy on the bottom of the table is a 3 drawer bin for silverware, snacks, etc. I removed the drawers to show how it's attached to the table. The lady in the 3rd picture is the "original" Pretty Penny.
Do I assume correctly that the white box under the table is used to support the table when lowered and used as a berth platform? If so, where did you find one the correct height?
Wrong assumption. It's a 3 drawer plastic storage bin for silverware, snacks, etc. I removed the drawers to illustrate how I attached it to the underside of the table; which BTW cannot be lowered on a 250.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.