Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Might not be repairable so looking for leads for a replacement. I'm guessing a new spar is too much to justify so looking for alternatives.
Does anybody know of (1) a mast for sale? I know, slim chances. (2) a CP25 for sale or heading to the scrapyard? (3) if any other boats use the same extrusion (4) any other info that could help
I determined some years ago that the mast section was a Kenyon 3350 MORC based on observation and measurements. I do not claim to be an expert on these matters so don't hold me to this fact, but this is where I would start.
Not sure yet and have called Catalina Direct for info, but based on the slot and slide in each I believe the Kenyon section is the boom and the Davis section is the mast
Well, I talked to a guy with a Capri 25 that dismasted his back in the early 2000s. I remembered this post and asked him where he bought the new extrusion. He said 'claco in Hamilton, ON.' I did a quick search and came up with this: https://www.klackospars.com/ Not sure if it's the right shop, but maybe? The guy said they had the Capri 25 extrusion in stock (at the time) and all they needed to do was cut it to length. YMMV
I gotta say this line sounds very promising: "We can bring in any extrusion."
-Matt
former Captain of Heartbeat Catalina 25 Tall #4816
I wonder whether there are any sailboat salvage yards out your way? With Seattle, Vancouver and the NW coastal waters, and lots of old Catalinas around, you could get lucky!
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.