Association Forum - Dock Line Chafe Protection

Assn Members Area · Join

Home.

Association Forum

Ships Store

Cruising

Racing

Technical Tips

Photo Gallery - New

Boat Search - Updated

Manuals & Brochures

Swap Meet

Links

Officer Flag Line & Staff

Bylaws & Constitution

Members Area

Join the Association

Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.

Association Forum

Username:	Password:
Save Password
Forgot your Password?

All Forums

Catalina/Capri 25/250 Sailor's Forums

General Sailing Forum

Dock Line Chafe Protection

New Topic

Reply to Topic

Printer Friendly

Author

Topic

Little Wind
Deckhand

Member Avatar

USA
24 Posts

Initially Posted - 03/18/2025 : 10:58:52

Anyone have any ideas/answers that they use for reducing chafe on dock lines? I know I can add sleeves or rubber hose over the lines but I was thinking that it would be nice to be able to adjust the lines without moving the chafe protection.
My bow is positioned at a concrete sea wall with cleats and the concrete easily induces chafe on my bow lines. So I'm wondering maybe... how to modify the concrete sea wall instead? Some type of covering or edge protector I can apply?
What ideas do you all have?

Hmmmmm... I just thought about maybe some plastic rain gutter material cut to length and folded over the edge of the concrete. It would have to be glued or siliconed in place. Gotta think about that...

Mark
Little Wind
1996 C250WB #206

Steve Milby
Past Commodore

Members Avatar

USA
5891 Posts

Response Posted - 03/18/2025 : 14:22:41

Click on the link below. I'm not suggesting you buy these, but use the general idea. Perhaps you could attach something flexible, like cheap rubber auto floor mats, to the cleats on the sea wall and position them so that they hang over the edge of the sea wall and protect your docklines from the rough edge of the sea wall. You'd want to tie the boat with spring lines to prevent it from moving forward and backward. That would eliminate the need to screw or glue anything to the concrete. https://th.bing.com/th?id=OPHS.DYj%2b3IB56bdaaQ474C474&w=592&h=550&o=5&dpr=1.6&pid=21.1

Steve Milby J/24 "Captiva Wind"
previously C&C 35, Cal 25, C25 TR/FK, C22
Past Commodore

Edited by - Steve Milby on 03/18/2025 14:27:41

OLarryR
Master Marine Consultant

Members Avatar

USA
3431 Posts

Response Posted - 03/18/2025 : 21:14:29

If you are at a marina, they probably have restrictions as to what you can do in the way of significantly modifying the concrete sea wall other than placing a temporary/easily removable covering on the edge of the concrete wall. The issue would be how to firmly attach a plastic. etc covering without permanently defacing the concrete wall top or side.

Not sure exactly just how much chafing or interference the concrete wall creates to your bow line(s). I am trying to visualize the issue - Is it that the bow line(s) are at a slight down angle from the cleat on the concrete to the cleat on your bow? and it's this downward slope of the dock line that then scrapes/chafes along the concrete edge as it traverses down to one of your bow cleats?

Just how much chafing is occurring ? Like how long weeks/months before you consider replacing the dock lines? If you can get by for a couple of months or longer, then you may want to consider utilizing a fairly long line keeping the bulk of it coiled past the bow cleat. Then as the chafing becomes worse at the seawall, start using some of that excess coiled line and thereby retiring the chafed area to excess line past the seawall cleat (since it is no longer to be used). In this way, you can get more life out of a dock line.

Another possibility but this is probably not feasible but what the heck......I doubt there is room for this between the seawall cleat and the seawall edge but you could get either a cheap Harbor Freight wood dolly or an old skateboard and place it between the seawall cleat and the seawall edge (attaching a line to the front and back of the moving dolly or skateboard and attached to the cleat so the dolly/skateboard does not fall off the seawall edge) then when you dock, the dock line(s) from the seawall cleat to the bow cleat straddle the top/mid-section of the dolly or skateboard. Then any movement of the dock line hopefully will be high enough clearing the edge of the seawall and the dolly/skateboard wheelswill enable some rocking forward or back a bit with the dock line. Crazy idea ! I would just use new sections of a long dock line or use protective sleeves on the dock line. If you go with the dolly or skateboard....then you gotta post some photos!!

Larry
'89 Robin's Nest#5820, Potomac River/Quantico, Va
http://catalina25.homestead.com/olarryr.html

Edited by - OLarryR on 03/18/2025 21:21:25

Topic

New Topic

Reply to Topic

Printer Friendly

Jump To:

Association Forum

Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.