Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 General Sailing Forum
 Bungees fitting deck/hull flange contour
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

zeil
Master Marine Consultant

Member Avatar

Canada
1308 Posts

Initially Posted - 05/16/2023 :  20:24:27  Show Profile
Have you ever faced the challenge of fastening tarps with bungees spread over the boom, pop-top or a horizontal mast?... or for that matter anything you wish to secure to the deck/hull joint with bungees not having the right shape or leaving ugly rust stains?

The image below shows the shape that clamps snugly onto a hull/deck flange of a C250 without any metal parts. Metal of any kind will quickly leave nasty hard-to-remove stains.

We've used these exact contoured to our deck/hull joint, "metal free" bungee clamps, successfully for years
and want to pass it forward.





Henk & Johanna
"Floating", a few off your "barnacles".
"Someday Lady" '95 C250WB #151 ('03 - 2016)
"Sea ya" 30ft Bayliner (04-2018 - 09-2018)
"Mariah" '96 C250WB #191 (05-2019 - 15-05-2023)
"Lady J" '00 C250WK #499 (05-2021 - 09-2022)

Edited by - zeil on 05/22/2023 08:37:22
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.