Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
I require a replacement mainsail cover on my 1986 Catalina 25 tall rig. I see that Amazon carries some less expensive covers and was wondering if anyone had experience using these. Any suggestions on replacements?
M. Linz Snellville, GA 1986 Catalina TR/FK #5345 Lake Sidney Lanier
I had a new mainsail cover made for a Cal 25 by Sailors Tailor in Spring Valley, Ohio. Their online base price for a C25 mainsail cover is $248. plus $17.00 for tall rig. They use an acrylan fabric that, IMO, is better than sunbrella, and they stitch their canvas with Tenara thread, which is very expensive and impervious to sun rot. You can specify all twist lock fittings instead of part twist locks and part snaps for $27.50. I added that option. They will also embroider your boat name on the cover if you wish. (I did not.) Their covers are beautifully made and, IMO, a bargain. Here's a link.
I second the motion! I bought one for my conventional rig C-25 about 5 years ago and it’s of very high quality. Now I need to find a bimini cover to match it exactly. I use my old Sunbrella bimini cover turned inside out (it hasn’t faded as badly as the outside), and from 25 ft away it still looks good.
My lovely lady bought some Sunbrella and made us a new mainsail cover. Cost less than $20.
Derek Crawford Chief Measurer C25-250 2008 Previous owner of "This Side UP" 1981 C-25 TR/FK #2262 Used to have an '89 C22 #9483, "Downsized" San Antonio, Texas
Thank you all for your replies. I'm still curious though if anyone has bought one from Amazon, and how good was the quality.
I took a quick look at several pages of sail covers on Amazon. It appears to me that all but one are the same cover but are offered by various retailers. Prices are all over depending on which retailer you chose. Zooming in on the pictures I saw several things that indicate they may not last long. Stitching being one of the signs I saw.
Sail covers are one of those items that are "Pay me now or Pay me later".
…. or you could order one from Amazon and test drive it If you find that it’s a good fit and it seems pretty well made, keep it. But if you get it and it turns out to be less than ideal, you can always return it. *** But make sure that you read the fine print! Some Amazon 3rd party sellers do not participate in Prime or offer free returns. ***
Purely as a guess, I suspect the Amazon covers are not stitched together with Tenara thread, and their thread will sun rot after 4-5 years, or sooner in southern states. The last time I bought Tenara thread, it cost $99. for a cone. It won't be used on inexpensive canvas. Sailors Tailor guarantees their covers for 10 years, but for most folks, they're probably good for nearly twice that. The closures on the Amazon covers appear to be velcro, not mechanical. Unlike velcro, mechanical closures allow air to circulate under the cover to dry out any moisture (wet sails). Velcro will not last as long as mechanical fastenings, and will need to be replaced.
To summarize, I think an Amazon cover might be ok in a more northern environment, especially if you are likely to only keep the boat far 3-4 years. In a southern environment, and where boats are typically left in the water year-around, a longer lasting cover would be a better choice.
FWIW, I have no financial interest in Sailors Tailor. They have been repairing my sails for well over 40 years, and they made a very nice mainsail cover for me. In fact, I presently have two sails that are being repaired by them.
Steve Milby J/24 "Captiva Wind" previously C&C 35, Cal 25, C25 TR/FK, C22 Past Commodore
Excellent point concerning velcro vs mechanical fasteners and moisture build-up. Maybe better quality really is the way to go. It's still tempting, however, to order one from Amazon if anything, to be able to inspect it before installing it on the boat (or returning it). Looks like I'll be mulling this over just a little more!
M. Linz Snellville, GA 1986 Catalina TR/FK #5345 Lake Sidney Lanier
Steve is right about Sailor's Tailor. They do good work. I used them a couple of times when I lived in Dayon, and was always pleased with the results. It's also an interesting place to visit if you live nearby.
Solomon Smith TANGO 89/WK/TR/#5942 Petoskey, Michigan
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.