Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Here's a mod to the manual bilge pump hose for a C250WB. The water-ballast has the bilge behind the stairs. The hose is loose and never ends up at the deepest part of the bilge. I added a 1-inch elbow and the red hose. The hose a now a snug fit between the liner and the hull. The down side is when heeling, the hose is no longer in the deepest part. I don't have to pump the bilge much anyway and I only pump when the boat is level.
Nice mod Russ, I keep repositioning the hose end jambing it between the top of the bilge area, but it always shakes free. Your's is a simple and efective solution == Like it!
paul
Bumped! Took just 10 mins to implement this mod. It does exactly as described. Russ, KUDOS!
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.