Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
h.jpg Home.
a.jpg Association Forum
s.jpg Ships Store
c.jpg Cruising
r.jpg Racing
t.jpg Technical Tips
g.jpg Photo Gallery - New
o.jpg Boat Search - Updated
m.jpg Manuals & Brochures
3rdrpt.jpg Swap Meet
l.jpg Links
f.jpg Officer Flag Line & Staff
b.jpg Bylaws & Constitution
 
1.jpg Members Area
1.jpg Join the Association
 
Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
 
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 Catalina 25 Specific Forum
 Replace port jib cam cleat

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

 
Check here to subscribe to this topic.
   

T O P I C    R E V I E W
mcjordan93 Posted - 10/26/2024 : 14:27:58
I need to replace the port jib cam cleat on my1985 Catalina 25. It appears the nuts are only accessible by climbing in the lazarette and reaching up. I tried, but I can’t get into the lazarette. Has anyone replaced this cam cleat? Any suggestions?
4   L A T E S T    R E P L I E S    (Newest First)
mcjordan93 Posted - 10/31/2024 : 12:47:19
quote:
Originally posted by GaryB

Is it possible to just replace the cams/jaws without removing the whole mechanism?
unfortunately, not. The cam cleat has completely come apart. The previous owner gave me a replacement cleat, and now I know why he didn’t replace it.
GaryB Posted - 10/30/2024 : 21:24:50
Is it possible to just replace the cams/jaws without removing the whole mechanism?
glivs Posted - 10/29/2024 : 09:44:48
First visit since selling my boat....
Within the "dumpster", consider removing the wooden trim on which dock lines can be hung and, if need be, removing the wooden bulkhead between the lazerette and the quarter-berth. Both are held in place by screws and are easily removed to give you extra room to maneuver. Working alongside the curved hull, however, is not easy.....Good luck.
Voyager Posted - 10/27/2024 : 06:23:48
Yep! I checked out the possibility of replacing mine a few years ago. It seems almost impossible to get into that space under the gunwales.
On the starboard side you can climb into the quarterberth and poke around up forward of the cubbyhole space, but I could not find a way to catch the nuts from down there.
On the port side, you have to turn yourself upside down to get into the fender locker, aka dumpster.
The teeth on my cleats got worn out over time, so instead of replacing them, I took a sharp file to them, which improved their bite. I use both the standard cleats and the cam cleats now for the jib sheets, and in stronger breezes I take a wrap or two around the winches.

Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.