Association Forum

Assn Members Area · Join

Home.

Association Forum

Ships Store

Cruising

Racing

Technical Tips

Photo Gallery - New

Boat Search - Updated

Manuals & Brochures

Swap Meet

Links

Officer Flag Line & Staff

Bylaws & Constitution

Members Area

Join the Association

Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.

Association Forum

All Forums

Catalina/Capri 25/250 Sailor's Forums

Catalina 25 Specific Forum

head sink drain

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:

UserName:

Password:

Format Mode:

Format:

Message:

* HTML is OFF
* Forum Code is ON

Smilies

Check here to include your profile signature.
Check here to subscribe to this topic.

T O P I C R E V I E W
Jointtortfeasor	Posted - 01/13/2024 : 19:21:31 I'm a new owner of an 89 Catalina 25. I can't seem to find the valve or how I drain the sink near the head. Am I missing something? I've checked under the sink, as well as space near the v berth. I also have a question about a black-looking fitting on the floor and underneath the v-berth cushions. Not sure what it is, and I'm not sure if I can post a picture of it on here. Thanks, Paul
4 L A T E S T R E P L I E S (Newest First)
OLarryR	Posted - 01/14/2024 : 14:45:19 Click on the �Association Forum�, then go to bottom of the bulletin board and click on the link for Testing - Then click on How to post photos. I also responded to your email.
Jointtortfeasor	Posted - 01/14/2024 : 12:43:11 Thanks, Larry. My layout looks a little different. Is is possible to post pics on these forums? Paul
OLarryR	Posted - 01/14/2024 : 08:21:23 By the way, I think what you are referring to as a �black looking fitting� is the valve for the sink. There are two of them, located on the hull near both sinks. The valve/seacock on our �89 Catalinas� is made of a plastic composite material believe called Marelon or something similar. Since this valve is flush with the hull, these valves are generally called seacocks and is a quarter turn ball valve operated by turning the lever. When the lever is parallel with the valve body, then the valve is open and when the lever is turned 1/4 (1/4 of a full circle/radius) turn so that the lever is perpendicular to the valve body, then the valve is closed. If this valve/seacock has not been operated for a very long time, like 1, 2 or more years ago, the seacock may be very tight or stiff to turn. This could be due to some sea crust or just an initial friction set between the ball and seating surfaces. Generally, once again operated, it then turns more freely. Sometimes, when my boat is raised out of the water for bottom painting, etc I sometimes place a little bit of grease on the seacock from outside the hull and then from inside, cylcle the valve to ensure it operates smoothly but this valve was probably designed to never require lubrication if regularly operated and it is possible that some greases may not be compatible with plastic material, so that is something to consider. Something to also consider before operating the seacock for the first time especially after purchasing the boat, is not to apply too much force to opening this valve - Obviously, it would be a disaster if this valve were to crack/develop a water path from it failing. Years ago, the design of this valve, how it was attached to the hull and its body material was revised perhaps a few times. From what I understand and perhaps others more in the know, can detail the material and design revisions thru the past Catalina model years but from what I understand, the �89 model has the best seacock design (to hull). and seacock body material - the body material and internals not subject to corrosion.
OLarryR	Posted - 01/13/2024 : 22:15:33 Paul, I also have an 89 Catalina. Below is a photo from my boat website that is of the space below the VBerth. It shows the original transducers for the depth and speed and the transducer for my fish finder that replaced my depth finder. On the starboard hull side is the sink drain tube and valve. The photo and addl photos of the VBerth area can be found on my website by clicking on project regarding VBerth Storage. An addl photo or two can be found clicking on the Fishfinder Install. I have never used my sinks but I have on occasion greased (from outside the hull) the seacocks/valves) and then periodically cycled them. I always leave the seacocks closed. When I purchased my boat Fall 2005, the galley/sink (manual pump) faucets never worked. I thought about replacing them and possibly installing electric faucets as I had done on an earlier sailboat I owned but....I considered how I was using the boat the first year or two I owned it and decided it was just easier and possibly safer to just utilize bottled water rather then messing with the onboard freshwater tanks and annual maintenance that would be needed. Perhaps, if I were using my boat for more overnighters, I would have considered restoring/replacing the faucets. Since I do not use the sinks, I generally do not open the seacocks, but sometimes when winter is approaching, I will pour an antifreeze mix down each drain and then open the seacocks just long enough for some of the mix to drain out and residual to remain in the lower portion of the drain tube, But I do not always do this since the seacocks remain closed all the time and therefore there is no freshwater in the drain to freeze. If there is any liquid in the drain tube, then it is the antifreeze mix.

Association Forum

Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.