Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 Catalina 250 Specific Forum
 Support Stands for WB Keel Work
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

doublereefed
Navigator

Member Avatar

167 Posts

Initially Posted - 04/06/2022 :  14:39:24  Show Profile  Reply with Quote
I am building a frame to support my WB so that a I can replace the turning ball, pulley, and pennant. Will inspect the keel pivot while I'm there. No boat yards anywhere near so I'm building two saw horses out of 6x6 beams left over from a remodel. I will have a beam in front of the keel and one just behind the keel trunk... at least that's the plan.

I am very worried about springing the water ballast tank while the boat is only supported at two points. I will have to be in and out a few times to accomplish the turning ball upgrade. Any advice or words of wisdom as I get ready to do this project?



'95 C250 WB #61
Midway, UT
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.