Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
ddougla
Posted - 06/17/2022 : 12:06:19 Hi All: A bad wind storm knocked over a tree that landed on top my 1981 C25 parked in my driveway. The mast was cradled at each end across the top of the boat and probably prevented the tree from crushing the top of the cabin. However, the tree crimped the front of the mast about 12 feet up from the base just below the spreader bars. I'm now left wondering if the mast can be repaired or will I need to replace it.
Doug D. sailing out of Port Clinton, OH
4 L A T E S T R E P L I E S (Newest First)
Voyager
Posted - 06/18/2022 : 08:26:00 In the case that the mast is not repairable, what are the alternatives? For example, is anybody parting out a C25? If other boats’ masts are available, does anything come close to a C25 mast in size, shape, fittings? Could Catalina direct source a mast if you call them up? Dwyer Masts in Rhode Island offers different mast extrusions. You can see them here: https://www.dwyermast.com/families.asp?cat1ID=20&cat1Name=Masts I hear that they offer a good product, but not cheap. Best of luck with the repairs — hope things work out well for you.
ddougla
Posted - 06/18/2022 : 05:51:02 Thanks for the input. I'm thinking the best way to proceed is to dock the boat at my harbor leaving the mast on the trailer and then seeking out a rigger in Port Clinton who can guide me on the best way to proceed. At least that way, I can use the boat for fishing and swimming until I get the mast repaired or replaced.
Steve Milby
Posted - 06/17/2022 : 15:02:48 Some repairs can be made to aluminum masts, but it depends on how severe the damage is. There must be some skilled riggers in the Port Clinton/Cleveland area. I'd suggest you take it to one or two and ask for estimates. They'll tell you if they can repair it and for how much. Take it to them. Don't just describe it to them. They'll need to see it.
islander
Posted - 06/17/2022 : 14:21:14 Wow sorry to hear this but I guess it really depends on if you can find a shop that does mast repairs in your area or finding a suitable replacement mast in your area. I'd go with whichever one of those two choices is available.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.