Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
h.jpg Home.
a.jpg Association Forum
s.jpg Ships Store
c.jpg Cruising
r.jpg Racing
t.jpg Technical Tips
g.jpg Photo Gallery - New
o.jpg Boat Search - Updated
m.jpg Manuals & Brochures
3rdrpt.jpg Swap Meet
l.jpg Links
f.jpg Officer Flag Line & Staff
b.jpg Bylaws & Constitution
 
1.jpg Members Area
1.jpg Join the Association
 
Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
 
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 Catalina 25 Specific Forum
 sizes for Bulkhead and vanity sink counter top

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

 
Check here to subscribe to this topic.
   

T O P I C    R E V I E W
Leetheflea Posted - 11/26/2022 : 21:25:56
Hi,
Looking to see if anyone has dimensions for the main bulk heads and the sink counter top across from the head.
Thank you.
(Catalina 25, '79, swing keel)
1   L A T E S T    R E P L I E S    (Newest First)
Voyager Posted - 11/28/2022 : 18:01:16
Editing my post on this, I realize that you probably need some assistance on this.

Which cabin layout do you have? This might influence the shapes of the two aft bulkheads.

The shape and all incremental dimensions of the 4 bulkheads would probably defy categorization. The outer edges are straight, however, the tops follow the curved inside of the cabin roof, then down by the deck-hull joint, there’s the shelf. Below the joint, the hide behind the seating, and are attached to the head sink base on the starboard side and the floor and port side bench settee with a standard layout. My cabin is the dinette style with a different port side aft bulkhead.

I don’t know, but I would suspect that the two forward bulkheads are the same on all C25s regardless of the cabin style.

If you still have them available, you could trace the outlines of the old bulkheads to replace them with new materials. Can you get 3/4” marine plywood with a teak or mahogany veneer? There’s also some edge banding and trim needed.

That said, which dimensions would you need?

The sink countertop is simply a rectangle with an oval hole cut into it, with a drop-in sink mounted to the Formica countertop. Pretty much 1985 materials technology.

Thinking about it, if you have the opportunity to redesign the bulkheads with a more open plan. Widen the openings and let more air and light through.

You might just opt to provide a portapotty and you could eliminate the head sink - some folks have replaced this section with a full-height hanging locker.

You still need a substantial piece of plywood to bolt the upper shrouds chainplates to, so you cannot eliminate them completely.

Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.