Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
I am not trying to start a lengthy debate about the merits of making your own sail, I know that has been discussed on here many times before. I am making my own mainsail. I am trying to find the dimensions on the factory sails for the Catalina 25TR so that I have a starting place. I have the normal IJPE dimensions. Those are readily available. I am looking for information on the foot and luff rounding, camber ratio, etc. I have my old mainsail and can get some dimensions from it, but it is so old and stretched that I am not sure how much to rely on them.
A friend used a SailRite kit for his Hunter 28.5 and it is doing great after 8 years. Have you checked with SailRite about the dimensions you need? I assume they have the panel patterns for a C 25.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.