Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Crawling around my Cat 25 I found the bilge pump hose going nowhere. The pump is functional but I don't know where the hose enters the bilge. Any drawings or answers out there?
On my dinette style, the business end of the hose lies (and is strapped down) in the lowest part of the bilge, runs up under the galley drawers and into the fender locker (dumpster). That's where it connects to the manual bilge pump then the hose follows the inside of the port side dumpster through a loop out to a thru hull on the transom well above waterline. Not sure what's visible on the other cabin types as I can see my keel and keel bolts in the bilge viewing them through openings in the dinette seat pedestals.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.