Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 Catalina 25 Specific Forum
 starboard vent hose
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

kiko
1st Mate

Member Avatar

USA
69 Posts

Initially Posted - 07/30/2014 :  10:13:35  Show Profile  Visit kiko's Homepage
Hey everyone,

bought some new 3 inch hose so I could clamp it to the air inlet cowling on the starboard side.

Question is, how in the world do you tighten that hose clamp? There is barely any room there for a screwdriver, nut driver, or socket.

Anyone had any success?

thanks!

Edited by - on

redeye
Master Marine Consultant

Members Avatar

3474 Posts

Response Posted - 07/30/2014 :  10:26:57  Show Profile
I had to use a dremmel to cut out some of the liner to get a socket over the vent itself for the removal/install.

Small wrench on the hose clamps.




Edited by - on
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.