Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Greetings all, I've purchased a used Simrad TP10. I've everything I need to mount it but was hoping for some words-of-wisdom from you folks. Anyone got a pic of this or a similar unit mounted on a C25?
Anyone have any comments on using one of these gadgets? Thanks Jan
I have considered installing a tiller pilot but just have not moved this to the action stage as of yet. In considering one, I noticed that they generally come set up to install on the starboard side but allow it to be easily adapted over to installing on the port side. The instructions generally call for a backing support plate to help withstand the continual cyclic/stress motions of the tiller arm and so I was looking at the underside on the starboard side for how that backing plate could be installed and noticed that there is an inner fiberglass liner preventing access to the cockpit side wall. I had not checked out the port side but agree with you that it is best to mount it on that side especially with the outboard on the starboard side and need to gain easy access to the outboard. So, is there a fiberglass liner on the port side ? Maybe since that side is physically in the dumpster area, there is no liner and therefore the port side also makes sense for easy access to install the support. Did you also install a backing support plate inside the dumpster ? or just attach the support with no backing plate ?
quote:Did you also install a backing support plate inside the dumpster ? or just attach the support with no backing plate ?
I do not remember what I installed as a backing plate, (I installed it about ten years ago). I don't think it's needs to be that robust, probably just some large fender washers. Or a small piece of hardwood. The force on the bracket goes both ways, that meaning, that it pushes as well as pulls on the mount.
There wasn't an inner liner on the dumpster area where I mounted mine.
Davy J
2005 Gemini 105Mc PO 1987 C25 #5509 SR/SK Tampa Bay
My Autohelm is now on starboard side over the compartment. It used a sleeve glued in the top of the combing. Unit could be used on either side. Makes a much safer helm as I can look and check course easier.
I installed an auto tiller last year. I tend to overdo some things; the alum brackets probably are not necessary. I installed one for a friend and we did not use the alum pieces.
1988 WK/SR w/inboard diesel Joe Pool Lake Hobie 18 Lake Worth
Life is not a dress rehearsal. You will not get another chance.
We put our pin on the small opening hatch on starboard, since not much fits in that compartment anyway. This avoided needing to use extenders. I put the bracket on the BOTTOM of the tiller. I put a piece of plywood under the hatch for stability. Worked great for many years.
Stu 1986 C34 #224 "Aquavite" Cowichan Bay, BC Maple Bay Marina (formerly San Francisco) (formerly C25 #2459 "Capricorn Two")
Davy, Thanks for that picture. I have a similar fitting on Wind Dancer and had no idea what it was for. Now I know that the PO had an autohelm. Now maybe look around to see what brand and maybe get one. Jay
Jay South County RI Cat 25 SR/FK/Trad #5645 Wind Dancer
Not trying to hijack the thread . . . but . . . . how well did the autopilot work, and how often did you folks actually use it? -- or, was it really worth it?
Peter Bigelow C-25 TR/FK #2092 Limerick Rowayton, Ct Port Captain: Rowayton/Norwalk/Darien CT
quote:how well did the autopilot work, and how often did you folks actually use it? -- or, was it really worth it?
The first time you are sitting on the bow pulpit looking back at the sails while the autopilot steers, it becomes worth it.......
Motor-sailing in light winds, in the Gulf of Mexico, video is only 37 seconds long, but the boat sailed like this without me touching the tiller for 6 and a 1/2 hours:
quote:Not trying to hijack the thread . . . but . . . . how well did the autopilot work, and how often did you folks actually use it? -- or, was it really worth it?
I solo sail quite a lot and use it when going on deck or below. Some times I just set it and sit back and enjoy my favorite beverage.
1988 WK/SR w/inboard diesel Joe Pool Lake Hobie 18 Lake Worth
Life is not a dress rehearsal. You will not get another chance.
Maybe this helps with how they do, maybe not... 2 gusts of +5 during filming... I ditched the camera not because I was off course, but because someone drifted into my path on a motorboat, with no anchor down. Pretty typical motorboat BS on the lake.
Not trying to hijack the thread . . . but . . . . how well did the autopilot work, and how often did you folks actually use it? -- or, was it really worth it?
I use it most of the time under power. and sometimes under sail. It does a great job when grabbing a drink or using the head. Last week i used it when i rigged the whisker pole. Imagine all the times you are single handing and you'd like to turn to someone and say "take the helm for a minute" . That's when you'll use it. after new sails, the best purchase I made for my boat.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.