Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
I want to make another panel with a convenient hatch with flag hinges and not that pain in the @#$ hatch that you have to lift up and wrestle with.
Has anyone used anything other than plywood to replace this thing?
Thanks
6 L A T E S T R E P L I E S (Newest First)
vdotmatrix
Posted - 07/26/2019 : 04:51:48 That would be much more involved than just tracing the pattern and making a new pieice. Besides The purpose of the OP was to ask about a suitable material and to enlarge and make the battery compartment hatch a better more accessible design
quote:Originally posted by TakeFive
quote:Originally posted by whk1965
Don't need to replace unless you want to, not structural.
I wouldn't assume that. I never left the slip with that panel removed. I think it helps stiffen the hull from lateral flexing, especially in a heavy blow.
However, I agree that a little rot at the bottom edge of the panel would be harmless. If you really want to fix it, a little grinding away the rot and fiberglass/epoxy mat in the right place should make it as good as new.
TakeFive
Posted - 07/25/2019 : 21:04:42
quote:Originally posted by whk1965
Don't need to replace unless you want to, not structural.
I wouldn't assume that. I never left the slip with that panel removed. I think it helps stiffen the hull from lateral flexing, especially in a heavy blow.
However, I agree that a little rot at the bottom edge of the panel would be harmless. If you really want to fix it, a little grinding away the rot and fiberglass/epoxy mat in the right place should make it as good as new.
vdotmatrix
Posted - 07/25/2019 : 17:34:04 Man I would like to do something about that ridiculous battery access. It is so lame. You have to lift it up then pull it out but you can't because the cushions are there[quote... Marine plywood?]Originally posted by doublereefed
vdotmatrix... you solved a problem for me. I had no idea that whole panel came off. I need to redo the battery trays and an bunch of cabling... was thinking I had to do the whole thing through that door. Awesome pix, good luck on the project. [/quote]
doublereefed
Posted - 07/25/2019 : 15:41:25 vdotmatrix... you solved a problem for me. I had no idea that whole panel came off. I need to redo the battery trays and an bunch of cabling... was thinking I had to do the whole thing through that door. Awesome pix, good luck on the project.
whk1965
Posted - 07/25/2019 : 15:34:01 Don't need to replace unless you want to, not structural.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.