Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
doublereefed
Posted - 06/08/2019 : 15:47:53 I Googled a bit, came up dry. Does anyone make a C250 (WB) carpet for cabin sole?
5 L A T E S T R E P L I E S (Newest First)
Stinkpotter
Posted - 06/09/2019 : 14:15:11 Agreed... Here's my version of that (in our C-25)--a short runner from Home Dopey...
The Persian pattern wasn't very nautical, but...
Steve Milby
Posted - 06/09/2019 : 13:04:00 Carpeting doesn't do well in a boat. When it rains, it gets wet at the companionway, or when things are spilled. If some nasty liquid is spilled, it's ruined. After one season, it's often too musty or moldy or dirty to reuse.
There are soft, plush feeling small, foam backed area rugs designed to use in front of the kitchen sink. I use 2-3 of them. They're inexpensive and easy to replace each year, feel soft and warm on the feet, and can be hung out to dry if they get wet, and they're very non-skid. For me, they're more practical and functional than "wall-to-wall" carpet in a boat. Most sand, dirt, or food crumbs can be shaken out, without using a vacuum cleaner.
Stinkpotter
Posted - 06/09/2019 : 12:19:23 Keep in mind Derek is speaking about a C-25... The cabin configuration is rather different--the galley and head are in opposite locations and the main bulkhead is at the mast post. But you can measure the maximum length and width and shop for a remnant as he suggests. Then one way to get the shape right is to make a template of several pieces of brown wrapping paper--cutting, folding and taping until it fits. Then turn the carpet and the template upside down to trace... (I know that sounds condescending, but safe is better than sorry. ) Some rubber-backed indoor/outdoor carpeting doesn't really need the edges serged as long as you're willing to pick up a couple of little pieces over the first week or so...
doublereefed
Posted - 06/09/2019 : 09:30:10 Good idea! Do you cut to shape using a template? I was thinking of doing this (since I couldn't find anything online) and just having the edges serged.
Derek Crawford
Posted - 06/09/2019 : 08:34:14 Being a frugal (i.e. cheap) kind of guy, I managed to replace mine every year for $10. I would go to the local carpet store and buy a 12' x 4' remnant of a suitable color. This almost perfectly fit my C25 with minimal cutting.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.