Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
yachtsea
Posted - 04/26/2019 : 13:56:08 Ahoy!
Spring is upon us, and regionally-appropriate, boats are in their driveways getting due attention such as my beloved Anodyne (SR,SK, Dinette config). Last year I installed the gas assist struts for the pop-top and that effectively advanced the top from its resting position (down) 2mm. This morning, I found it preferable to relocate the anchor U brackets rather than drill new holes in the pop-top. I successfully avoided joining the new holes to the old holes and we're now sucking down the pop-top with rotational force; however, there are four abandoned holes. Granted, when all is well, they are above the waterline, inside the cabin but they are holes nonetheless and I don't like open holes. Tacky and straight shot to the core.
What do I use to fill these voids?
Thanks much,
Carl
2 L A T E S T R E P L I E S (Newest First)
yachtsea
Posted - 05/16/2019 : 15:39:38 Hi Capt. Dave,
Thanks,
Carl
Stinkpotter
Posted - 04/26/2019 : 14:17:01 The general-purpose answer is Marine Tex, which is a 2-part epoxy putty that is easy to form in holes (without running out) and is white after it sets up. Another is Pettit Easy-Tex, which comes in little tubes--putty and hardener. If you want the surface to be a little prettier, cover with some one-part gelcoat patch like this:
If the hole is tiny enough, you can use the patch by itself--it's somewhat viscous.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.